Engineering review for every RFQ
CNC · 3D Printing · Sheet Metal · Injection Molding
Prototype · Low Volume · Production
Process, material, finish and inspection decisions connected

Shenzhen, China

Search
Menu

A practical manufacturing partner connecting process, materials, applications and review.

The factory collage shows building, workshop and manufacturing context.

An illustrative planning graphic connects critical features, manufacturing decisions and engineering review. It is not a production inspection record.

Use Contact for general conversation or Engineering Review for a project-specific brief.

Turning and Milling a Cylinder with Internal Slots

The operator identifies the non-circular internal profile and trapezoidal thread, then shows the turning and milling setups used on the same part.

Watch on YouTube

Chapters

Selected chapter: Internal thread

Engineering notes

Identify which internal features can share the turning datum. Verify tool clearance and inspection access for the slots and thread before choosing the final setup.

Transcript

This part went through programming, setup, turning and milling.

We milled this slot because the internal profile is irregular and not circular.

The thread and the inside of the part were milled too.

The thread has a trapezoidal profile, and the bore is not perfectly round.

We programmed the details and worked through the profile with a T-slot cutter.

First, we roughed out the shape on the lathe.

Next, we used the machining center to work on the slots and the two flats.

We clamped the part for the first side, then reclamped it to reach the inside.

Then we finished the edges and cleared out the interior.

What would you quote for a part like this?