Engineering review for every RFQ
CNC · 3D Printing · Sheet Metal · Injection Molding
Prototype · Low Volume · Production
Process, material, finish and inspection decisions connected

Shenzhen, China

Search
Menu

A practical manufacturing partner connecting process, materials, applications and review.

The factory collage shows building, workshop and manufacturing context.

An illustrative planning graphic connects critical features, manufacturing decisions and engineering review. It is not a production inspection record.

Use Contact for general conversation or Engineering Review for a project-specific brief.

Rotary Workholding for a Cylindrical Housing

The operator shows a cylindrical housing in a chuck, then presents a supported machining setup and a rotary fixture that gives the tool access to side openings.

Watch on YouTube

Chapters

Engineering notes

Check how the housing is supported when the tool reaches side openings. Confirm the angular locations and reference features from the drawing.

Transcript

Programming and machining took 40 hours on
this job.

The parts need anodizing. This is the
machine we used.

Leave the stock long. Chuck it in the
lathe and turn the outside down to this
step.

Face the end and plunge the groove.

Turn the part around and face off the
excess stock.

Machine the end groove, then bore the
inside.

Make a support fixture with a stud through
the center.

Fit the cover plate, tighten the screws
and drill the top holes.

Use an extended tool to mill the three
lower notches.

Set up a rotary fixture with a draw rod
and a plate with four locating pins.

Orient the part, seat the pins in the four
holes and secure the fixture.

On the rotary axis, mill the top features
and openings.

There were five setups, and we made seven
pieces.

What do you think of the job? What would
you charge?