Engineering review for every RFQ
CNC · 3D Printing · Sheet Metal · Injection Molding
Prototype · Low Volume · Production
Process, material, finish and inspection decisions connected

Shenzhen, China

Search
Menu

A practical manufacturing partner connecting process, materials, applications and review.

The factory collage shows building, workshop and manufacturing context.

An illustrative planning graphic connects critical features, manufacturing decisions and engineering review. It is not a production inspection record.

Use Contact for general conversation or Engineering Review for a project-specific brief.

Clamping and Cutoff for a Multi-Sided Bracket

The operator shows the bracket, reorients the work in its fixture, mills a slot and cuts the part free. The remaining material supports the part until the cutoff step.

Watch on YouTube

Chapters

Selected chapter: Clamping and reorientation

Engineering notes

Review which faces need to remain accessible and whether the remaining stock can support the part until cutoff. Clamping forces, dimensions and acceptance results are specific to the job.

Transcript

Machining and finishing averaged about an
hour per part.

We made ten parts on the machine behind
me.

A three-axis machine could do this, but
the setup would be more involved.

We used five axes for a simpler setup. The
three-axis machine was busy.

The five-axis setup uses more stock for
clamping.

Machine the rear clamping area, then turn
the part over.

Face the side and mill the edges with a 2D
toolpath.

Index the part to reach the slot, then cut
the slot to fit.

Finish the slot, cut the edge and clean up
the features.

Finally, cut around the profile to
separate the part.

That finishes the job.

What would be a fair price per part?