Engineering review for every RFQ
CNC · 3D Printing · Sheet Metal · Injection Molding
Prototype · Low Volume · Production
Process, material, finish and inspection decisions connected

Shenzhen, China

Search
Menu

A practical manufacturing partner connecting process, materials, applications and review.

The factory collage shows building, workshop and manufacturing context.

An illustrative planning graphic connects critical features, manufacturing decisions and engineering review. It is not a production inspection record.

Use Contact for general conversation or Engineering Review for a project-specific brief.

Custom Lathe Workholding for a Large Ring

The operator shows a large ring, a custom gripping arrangement on the lathe and a fixture ring used before drilling and milling the side features.

Watch on YouTube

Chapters

Selected chapter: Ring overview

Engineering notes

Mark the locating surfaces used when transferring the ring between setups. Confirm support, clamping pressure, stock allowance and finish requirements for the actual geometry.

Transcript

The machining sequence included making the fixtures for these rings.

We used two setups on the lathe.

There was a five-axis setup, followed by a flip to reach the back.

We made a large gripping fixture on the lathe to hold the ring.

We turned a small step for the plate, then clamped that end to turn the inside and outside.

We changed the plate position to finish the opposite end.

The ring then went on to five-axis machining.

We made a fixture ring, secured the part and machined features around the side.

We left extra stock on the inside and outside because the starting size was not an exact fit.

The outside still needs a paint finish.

What do you think of this job?