Engineering review for every RFQ
CNC · 3D Printing · Sheet Metal · Injection Molding
Prototype · Low Volume · Production
Process, material, finish and inspection decisions connected

Shenzhen, China

Search
Menu

A practical manufacturing partner connecting process, materials, applications and review.

The factory collage shows building, workshop and manufacturing context.

An illustrative planning graphic connects critical features, manufacturing decisions and engineering review. It is not a production inspection record.

Use Contact for general conversation or Engineering Review for a project-specific brief.

Reclamping a Block to Mill Multiple Faces

The operator compares the starting block with the machined part, then shows how the block is turned over to reach features on another face.

Watch on YouTube

Chapters

Selected chapter: Part and stock

Engineering notes

Review which faces can be used to locate and support the block in each setup. Check the drawing for dimensions and relationships between features on opposite faces.

Transcript

We made ten parts. Programming and
machining took 12 hours.

They also need anodizing. We ordered two
blocks of stock.

There were two five-axis setups and one
three-axis setup for the opposite face.

Use this machine and leave the stock
thicker.

Mill one part at a time from the stack.
Ten parts came from two blocks.

Face the block and mill the top.

Drill the holes and machine the slots.

Flip it over and drill the holes around
the rim.

Cut it free and finish the small side
holes.

The outside profile and slots have their
own tolerances.

We made ten parts. What do you think each
one is worth?