Engineering review for every RFQ
CNC · 3D Printing · Sheet Metal · Injection Molding
Prototype · Low Volume · Production
Process, material, finish and inspection decisions connected

Shenzhen, China

Search
Menu

A practical manufacturing partner connecting process, materials, applications and review.

The factory collage shows building, workshop and manufacturing context.

An illustrative planning graphic connects critical features, manufacturing decisions and engineering review. It is not a production inspection record.

Use Contact for general conversation or Engineering Review for a project-specific brief.

Reclamping a Turned Cylinder for Off-Axis Features

The clip follows a cylindrical workpiece through a lathe chuck and a second fixture. The operator shows how a different orientation provides access to features away from the turning axis.

Watch on YouTube

Chapters

Engineering notes

Review which surfaces remain available for clamping after turning. Confirm the thread and hole requirements from the drawing.

Transcript

We made two pieces. Programming and
machining took a little over two shifts.

The top and bottom are angled.

Four holes are normal to the round
feature.

Start by turning the stock and leaving
material for clamping.

After the first five-axis operation,
reclamp it to machine the other side.

Machine the angled top, then the bottom.

Reposition the part in a second fixture to
reach the inside.

Grip the reserved clamping area to machine
the center feature.

Secure this section, then move to the
three-axis machine.

Drill the small holes. We made two parts.

What do you think of this job?