Engineering review for every RFQ
CNC · 3D Printing · Sheet Metal · Injection Molding
Prototype · Low Volume · Production
Process, material, finish and inspection decisions connected

Shenzhen, China

Search
Menu

A practical manufacturing partner connecting process, materials, applications and review.

The factory collage shows building, workshop and manufacturing context.

An illustrative planning graphic connects critical features, manufacturing decisions and engineering review. It is not a production inspection record.

Use Contact for general conversation or Engineering Review for a project-specific brief.

Profile and Slot Milling for a Grid Panel

The operator shows the grid panel during external profile machining, then shows the narrow slots and the T-slot cutter setup. The last view shows the finished part.

Watch on YouTube

Chapters

Selected chapter: Profile machining

Engineering notes

Flag undercuts and narrow tool access in the drawing. Plan clamping around thin walls and verify fit and flatness on the finished part.

Transcript

The stock for this job cost 130 yuan. We
made four parts.

Programming and machining took 25 hours.

This side slot needs a T-slot cutter. Five
faces need machining.

The part needs anodizing. I used this
machine.

Start with thicker stock, clamp it and
mill the outside profile.

Mill these two pockets.

Leave the small lower slots intact at this
stage.

Finish the ledge and drill the holes.

Flip it over and face it to thickness.

Then mill out the small slots.

The center is thin. Too much clamping
pressure deforms it.

Too little pressure lets it move. I added
two dots of adhesive on the back for
support.

For the last setup, stand it up. Mill the
slot with a flat cutter, then finish with
the T-slot cutter.

Drill the row of holes, then reposition it
for the side holes.

Three of the four parts are here. One is
still in the machine.

What do you think each part is worth?