COATING

Powder coated

A cured coating adds color, texture and coverage to specified surfaces.

ENGINEERING DOSSIER

Specify powder color, gloss, texture, coverage and masking as one finish map

Powder coating begins with a surface and masking map

Color, texture, coverage, threads, contacts, sealing faces and critical fits must be explicit.

Sequence and substrate evidence

Record the base material, preparation, operation order and any approved appearance reference so the visible result remains explainable.

Acceptance belongs to named surfaces

Use a surface map for cosmetic zones, contacts, threads, fits, masking and geometry-dependent variation.

Release inputs for Powder coated

Specify base material, preparation, color and texture reference, coated and masked zones and critical fits.

APPEARANCE AND FUNCTION

Appearance, function and substrate boundary for Powder coated

Powder coating provides a colored protective polymer film with selectable color, gloss and texture. Edge build, recess coverage and batch-to-batch appearance need an agreed reference.

Adds corrosion and cosmetic protection but also coating build. Mask threads, grounding areas, seal lands and precision fits; allow for edge and recess variation.

DECISION CONTROLS

Protected interfaces and acceptance controls for Powder coated

Sequence and substrate evidence

Confirm substrate alloy/grade, condition and any preparation specific to Powder coated. Compatibility must be checked against the named base material, not a generic family.

Acceptance belongs to named surfaces

Map cosmetic zones, datums, fits, threads, electrical contacts, seal lands and areas that must remain uncoated or require controlled build for Powder coated.

Release inputs for Powder coated

Specify Powder coated by process/standard where applicable, appearance reference, coverage, masking map, thickness or build requirement if relevant, and protected critical dimensions.

PROJECT-SPECIFIC DECISION DATA

Finish map before Powder coated release

Confirm substrate, preparation, appearance/function, protected zones and inspection evidence; do not infer acceptance from the finish name alone.

Decision item	What must be resolved	Evidence at release
Powder coating begins with a surface and masking map	Color, texture, coverage, threads, contacts, sealing faces and critical fits must be explicit.	Reference, texture, color or toolpath
Sequence and substrate evidence	Record the base material, preparation, operation order and any approved appearance reference so the visible result remains explainable.	Protection, contact, wear or interface role
Acceptance belongs to named surfaces	Use a surface map for cosmetic zones, contacts, threads, fits, masking and geometry-dependent variation.	Coverage, masking and critical features
Release inputs for Powder coated	Specify base material, preparation, color and texture reference, coated and masked zones and critical fits.	Coverage, masking and critical features

INSPECTION AND ACCEPTANCE

Inspect Powder coated against the named reference and functional interfaces

Inspect Powder coated against the agreed sample/reference, coverage and surface zones; verify masked interfaces, thread function, fit-sensitive dimensions and any required adhesion/corrosion evidence.

Geometry, access, edges, recesses and part-to-part variation can affect the result; use a named reference and surface map.

PART AND PROCESS EVIDENCE

Powder coated close-up, process and acceptance evidence

Debaolong surface (8)

Surface finish masking diagram for sheet metal parts showing powder coating, plating, masked threads and grounding areas

Surface finish diagram for sheet metal parts showing cosmetic face, grain direction, masking, brushed finish, plating and powder coating

DECISION QUESTIONS

Powder coated specification and inspection questions

What must be defined before reviewing Powder coated?

Color, texture, coverage, threads, contacts, sealing faces and critical fits must be explicit. Record the base material, preparation, operation order and any approved appearance reference so the visible result remains explainable.

Which interfaces need project-specific confirmation?

Use a surface map for cosmetic zones, contacts, threads, fits, masking and geometry-dependent variation. Geometry, access, edges, recesses and part-to-part variation can affect the result; use a named reference and surface map.

What should accompany release?

Specify base material, preparation, color and texture reference, coated and masked zones and critical fits. Coverage, masking and critical features

PROJECT BRIEF

Powder coated finish map and acceptance checklist

Use these page-specific checks to define substrate, preparation, appearance or function, protected zones and acceptance evidence for Powder coated. Do not release from the finish name alone.

Pretreatment and substrate — Powder coating begins with a surface and masking map

Color, texture, coverage, threads, contacts, sealing faces and critical fits must be explicit. Record substrate and pretreatment on a controlled surface map.

Appearance or function — Sequence and substrate evidence

Record the base material, preparation, operation order and any approved appearance reference so the visible result remains explainable. Attach the named appearance or functional reference used for acceptance.

Masking and acceptance — Acceptance belongs to named surfaces

Use a surface map for cosmetic zones, contacts, threads, fits, masking and geometry-dependent variation. Mark masking, fit-sensitive zones and the inspection record required at release.

CONTINUE THE ENGINEERING REVIEW

Continue the engineering review for Powder coated

Connect this decision to the related manufacturing route, material, finish and file-review workflow.

Powder coated

Specify powder color, gloss, texture, coverage and masking as one finish map

Powder coating begins with a surface and masking map

Sequence and substrate evidence

Acceptance belongs to named surfaces

Release inputs for Powder coated

Appearance, function and substrate boundary for Powder coated

Protected interfaces and acceptance controls for Powder coated

Sequence and substrate evidence

Acceptance belongs to named surfaces

Release inputs for Powder coated

Finish map before Powder coated release

Inspect Powder coated against the named reference and functional interfaces

Powder coated close-up, process and acceptance evidence

Powder coated specification and inspection questions

What must be defined before reviewing Powder coated?

Which interfaces need project-specific confirmation?

What should accompany release?

Powder coated finish map and acceptance checklist

Pretreatment and substrate — Powder coating begins with a surface and masking map

Appearance or function — Sequence and substrate evidence

Masking and acceptance — Acceptance belongs to named surfaces

Continue the engineering review for Powder coated

Capabilities

Materials and finishes

Upload CAD